THE ADD A PINION GEARBOX “LATER” BIKE BUILDER
The N-2 takes design elements from the N-1 and pushes the great british weather concept further. A low chainstay and Salsa Alternator dropouts take the N-2 into areas of Singlespeed, Sturmey Archer, Alfine, Kindernay and Rohloff hubs before even thinking about derailleurs. The N-2 has also been designed around 2 tyre sizes. Both 29 x 2.4" and 27.5 x 3.0" (plus sized) tyres without affecting the handling. This design uses the benefits of carbon monocoque construction, sharing the same geometry as the N-1. There is also a Pinion option and the dropouts are split to accommodate Gates Carbon Drive belts.
With more tyre clearance this frame fits FAT 26'x4.0" and 27.5'x3.8" tyres. Each Olsen Frame can be changed by you the customer. The "base geometry" design is a culmination of all the years designing and modifying geometries. This frameset has a long reach and long chainstays for a stable ride. Suiting both 26++ & 27.5++ wheels and tyres on 55-90mm rims. This frameset comes with the Pinion C-Line Gearbox and 104BCD spiders with 39T:39T sprockets and a 120T carbondrive belt.
All Pinion cables are run internally for the complete uncluttered look, and easier to clean.
This OLSEN Pinion Gearbox Bike Frameset comes with the following:
Pinion C-Line gearbox.
CNC Chainset and shifter
C-Line Gearbox is powder coated and only available in Black.
Shifter is Black - however upgrades are available
Head angle optional: 68-70 degrees
Headset optional: Tapered headset SHIS 44/56 or straight SHIS 44mm
Fork Range optional: 470-510mm / 120mm (27.5") 100mm (29")
Wheel sizes: 26x4.0 or 27.5x3.8"
Chainstay length: 445mm
Rear end: 142mm X12 Maxle
Bottle cages: 6 (under and over the down tube)
2x FAT 104BCD spiders
2x Gates 39T CDX Sprockets
1x 120 CDX Carbondrive Belt
THE N-2-PL PINION NOW FRAMESET.
Want to SINGLESPEED or DERAILLEUR, but have the option for a PINION GEARBOX??
The N-2 FRAME is long with a Reach of up to 475mm, ideal for running 140mm forks with 29" or 150mm with 27.5" Wheels. We have shortened the Chainstay to 435mm to create sharper handling.
Head angle: 66 degrees
Headset: SHIS ZS44/ZS56
Fork Max: 530mm / 150mm (27.5") 140mm (29")
Wheel sizes:27.5x3.0" or 29x2.4"
Chainstay length: 430mm
Rear end: 142mm X12 Maxle
Bottle cages: 1
This frameset comes with SALSA ALTERNATOR 2 swing dropouts and an option for a PF92 or T47 bottom bracket. It is uncluttered with all cables run internally and only 1 bottle cage. The rear brake runs externally along the underside of the top tube and down the rear seat stay. 1 bottle cage ensures the down tube is un-drilled, holding its impact strength.
This frame can also be built up with the following options:
Derailleur 1x11, 1x10, 1x9 SRAM or Shimano setup.
39:24T Belt-drive single-speed
32:18T chain singlespeed setups
Pinion P-Line 18 - 9 speed gearboxes
Pinion C-Line 12 - 6 speed gearboxes